help me identify these parts

[Jeremyxc300]

I was wondering if anyone knew anything about these triple clamps and this stabilizer mount piece. I have seen a stabilizer kit from ohlins that had a similar piece, but nothing else really. These clamps look aftermarket to me, but have no markings at all. They were on my 2000 xc300 when i bought it.

 

[pscook]

That collar looks identical to the collar I had with my Scott's damper on my 2002 XC300. Of course, it would work with the GPR as well, I would assume.

The triple looks aftermarket, with the bolt holes in the top clamps I would say it's drilled for a damper, either a GPR or a Scott's.

 

[coopernicus]

I have some Scotts clamps from that year bike and they don't look like that. They are a dark grey color and have distinctive machining marks that are not visible in these pictures. Emig clamps were typically blue but they usually have an Emig identifier on them.

Eric

 

[Jeremyxc300]

The clamps have no marking at all from what i can see. The collar piece/stabilizer mount thing does have a marking but it was where all the chrome chipped off and the only text that i can make out is the remnants of a 2 with a little 11.3 printed behind it in a bubble, i've been looking at scotts dampers and can't find anything that looks similar. i have a feeing if i find what brand of top clamps those are, it will help me find the matching stabilizer.

 

[Jeremyxc300]

so, anybody know anything bout these parts?