How to remove Flywheel?

F

Fabry

New member
I have some problem removing my 2003 EC250 Flywheel, this bike have the optional 14 oz weight and the manual says: "...loosen by turning to the left", what does that mean? turning clockwise or counterclockwise?
I've tried by turning clockwise with impact wrench like most flywheels but it didn't work so before doing anything else I need some more clarification.
Here's a picture:
20130704_102620.jpg
 
Yep Counterclockwise worked it just needed some heat to release the grip a little bit.
Now I need to find a M27x1 puller. :)
 
Left loosey :D

On the other side of the crank, the pri drive nut is the opposite though. just fyi.
 
In this kind of rotating things, just remember that if you grip the piece during the work, it can't loose.
 
Fabry said:
Yep Counterclockwise worked it just needed some heat to release the grip a little bit.
Now I need to find a M27x1 puller. :)
Click to expand...

That style of puller is used on EVERY Japanese motorcycle 250cc and above. Rent one from a shop or buy one yourself. If you plan to own a two-stroke for longer than 5 years, spend the $12 and buy a puller. Worth its weight when you are stuck needing one.
 
pscook said:
That style of puller is used on EVERY Japanese motorcycle 250cc and above. Rent one from a shop or buy one yourself. If you plan to own a two-stroke for longer than 5 years, spend the $12 and buy a puller. Worth its weight when you are stuck needing one.
Click to expand...

Yep just ordered one on E-bay that have both M24 and M27.
 
Nice sketch, Fabry! You must have some engineering background. When you say 14 oz, is that the total weight of the part?
 
You must log in or register to reply here.

Similar threads

liv2day
Head Removal w/ Pics
Replies
6
Views
4K
StuJohnson
StuJohnson
barkeater
Let me know if I'm waaay off on any of this.
Replies
19
Views
6K
barkeater
barkeater
Back
Top