1: Kokusan shifter kart ignition CDI unit. As new. This ignition will replace the stock unit on 2-strokes prior to the multi-pin CDIs. It has the same wiring, a 2pin male-female plug, and push in connectors on single wires, same colors as stock. The advance comes on sooner, and advances a little further, to my recollection. I bought two of these from a kart shop in California, one went with my EC250 which has been sold. Ease of jetting, and performance were vastly improved. $75 inc shipping
2: A stock Kokusan GasGas ignition, and a KTM 250EXC ignition. I didn't like either of these ignitions, never could get the bike (2002 EC250) to run well, jetting and so on didn't seem to fix it. Either will get you home, good spares. The best part is the wiring with the KTM unit, it has the multi-pin plug which fits the new ignitions with about one foot long wires. $30 inc shipping
You can contact me at waltonron1@gmail.com . Shipping is included in price, the parts are located in Western Colorado just in case you are nearby.
2: A stock Kokusan GasGas ignition, and a KTM 250EXC ignition. I didn't like either of these ignitions, never could get the bike (2002 EC250) to run well, jetting and so on didn't seem to fix it. Either will get you home, good spares. The best part is the wiring with the KTM unit, it has the multi-pin plug which fits the new ignitions with about one foot long wires. $30 inc shipping
You can contact me at waltonron1@gmail.com . Shipping is included in price, the parts are located in Western Colorado just in case you are nearby.
Last edited:
