KX plastics for GG

[brains]

I'm rebuilding a 05 300 and wanted to use KX front and rear fenders in black.
Problem is that both Polisport and UFO only have front in black and not the rear.

The cross over list says 94 to 98 KX, has anyone found anything else that fits?

 

[Cruiser]

I have a ufo rear black fender for a 98 kx on my 97 right now,, they do make them.
Steve

 

[rider01]

kx PLASTIC

This wont help with the rear of the bike, but I had a 2001 Kx 250 & I put a front fender on it off an 03 . It bolted right up , no problems . And it has a much better look to it than the 02 & older fenders.

 

[d2w]

So, are the KX cross-over rear fenders an exact match for the GG OEM frear enders (in terms of all of the mounting holes and platforms for the ignition module, etc.), or are they just "close" and one needs to modify them to work?

So silly of me not to mention that I'm trying to find a possible replacement for the rear fender of my 2006 EC300.

Thanks.

Dale

 

[Cruiser]

On the 97 it was the exact same, looks to be on the 03 too but the newer ones are a little different I think,,
Steve

 

[colinmc400]

This is something on my winter list of "to do's", as i reckon the blue plastics on my 06 300 will be needing a freshen up.

I had heard some less than great reports about Polisport, with regard to how well they fit (mounting hole alignment etc) and what quality of plastic they use. Having only ever used OE (Acerbis) and UFO plastics on my KTM's, i have always had top notch replacement plastics.

Any body had any bother with their red plastics turning pink as they fade? Its quite sunny in Western Aus where i live, so sun fade is an issue.

 

[Cruiser]

As far as the pink its really only on the old hebo plastic from like 2000 and older,,

 

[JoshP]

I could just sell you the Pink plastics off my 97 and then you could cut out that whole fading period. Even has some fantastic crappy 90's graphics on it, has that Asian guy wearing Fluorescent snow suit while skiing feel to them.

 

[widebear]

Dave @ gnarlyparts.com told me that acerbis has discontinued the 94-98 black rear fender.

 

[slocalspode]

This news would be most sad, as I am ready to try and find some
black plastic for my "98" EC250.
I found the rad guards already. So at least that is covered.
Let the search begin!
Jeff in So. Cal.

 

[d2w]

For the person looking for a black rear fender, Dave at Gnarly Parts.ca wrote:

"The KX Fender will fit the Gas Gas from 99-04. In 05 they changed the sub frame enough to not make them fit without lots of work. I only have 2 left in black and that's it. Acerbis is not making them anymore. I can get you OEM fenders if you wish. I have a dealer account with Gas Gas Pacific."

Regards.

Dale

 

[slocalspode]

I would be one of those folks looking for a black rear fender for a 98 EC250.
I also need the side number plates.
I would be interested in either the stock GG plastic or aftermarket KX items.
Any clue as whom to contact would be apreciated.
Thanks, Jeff So. Cal.

 

[d2w]

Try this link:

http://ww.gnarlyparts.ca/

And there's a US site too.

Dale

 

[cladoo]

This is a pic of a OEM '06 EC300 rear fender and beside it is an Acerbis rear fender for a Kaw KX125-250 99/02 Part # 0008357.090 It looks like it would fit except for the screw bosses on the GG fender and the extra wing on the side of the GG fender. These are for sale also.