New 2014 GasGas Motor

[webmaster]

Posting this for Steve Christini...... They have an extra motor they didn't use in their AWD units....

https://www.ebay.com/itm/NEW-2014-Gas-Gas-EC300-Engine-kit-/182964157811?hash=item2a99837d73

jeff

 

[nhgas]

Will this engine bolt onto a 2010 or 2005 Chassis?

 

[Jacob 'Berg]

Will this engine bolt onto a 2010 or 2005 Chassis?

I would wait for someone else to confirm, but I believe the motor mounts are different from 2012 and onward.

 

[cladoo]

I put a 2013 engine in my 2010 EC300.

 

[RBrider]

I see it went for 1500 Usd. Not a bad deal if you were facing a major rebuild.

RB

 

[barbotte]

crap i miss that deal as i need a new motor ,,, ho well !!

 

[Sierra Gasser]

2014 E start 300 Timbersled motor

Sorry about that Barbotte,
I had to have it as I have been looking for E start three hunny to put in my Timbersled project.
Will Big Bore to 330 cc and low Nitrus bleed Should pull well.
Whats wrong with your motor?
I overhaul em and perform a host of mods.
Email me for engine parts ntms1@sbcglobal.net or see my ebay store.
Far too much stuff to list.

 

[risk74]

Sorry about that Barbotte,
I had to have it as I have been looking for E start three hunny to put in my Timbersled project.
Will Big Bore to 330 cc and low Nitrus bleed Should pull well.
Whats wrong with your motor?
I overhaul em and perform a host of mods.
Email me for engine parts ntms1@sbcglobal.net or see my ebay store.
Far too much stuff to list.

What's the name of the Ebay store?

 

[barbotte]

Sorry about that Barbotte,
I had to have it as I have been looking for E start three hunny to put in my Timbersled project.
Will Big Bore to 330 cc and low Nitrus bleed Should pull well.
Whats wrong with your motor?
I overhaul em and perform a host of mods.
Email me for engine parts ntms1@sbcglobal.net or see my ebay store.
Far too much stuff to list.

thank for the offer i need store adress as i will need lots of part as when i did my last ride back in November the engine made a lot of click noise until it finally shut off ,,, after 30 minute when the engine cool offit start up again making more click noise so i shut it off ,,, yesterday i did a compression test and get only 110- 115 psi ,in the next few week when it warm up as it is - 20 celcius here i will put it apart to see what i need ,,
cheer
henri