New to forum. .

spooly

spooly

New member
hi my name is brendan im new to the forum..I am now the proud owner of a 07 gg ec 300 I love the bike and want to splash out on parts and mods and im looking for tips on what and where to buy..im only riding bikes a couple of months so my knowledge is limited on the ec..I'm from Ireland but it looks like ill be shipping most my parts from the uk so where can I buy online. .im looking for a sump guard, fmf pipe guard, piston and gaskets, fork bleaders, tyres , higher seat and cover..and can I get lower pegs?? im 6ft 2 ...looking forward to discussing everything enduro with ye :D:D

Sent from my GT-I9300 using Tapatalk
 
Welcome aboard! You'll find this site isn't lacking for info on your new toy. If if it has anything to do with GasGas, and the info doesn't exist here...I'd be inclined to think said info does not exist:D
 
There's a couple of items I can't seem to source..a red seat cover. .fmf gnarly pipe guard and a lower set of foot pegs? ? any help would be greatly appreciated. .

Sent from my GT-I9300 using Tapatalk
 
Gutz might be able to make a custom colour seat cover.
P3 Composites for the pipe guard - also on here.
Footpegs -crossover with Yamaha, however will need to cater for clearance of the brake pedal/pivot on the rhs. Also note the biggest issue most face with that particular chasis is the footpeg/ground clearance. I'm not sure I'd be looking at moving them closer to the ground. Probably better to get a tall seat foam and raise the bars.
 
iv got some bar risers. .but how much would I gain with the high seat foam as I do tend to sit down a lot. .are these European company's because the shipping costs from the states is outrageous. .wouldn't be worth while. . ya maby I should leave the pegs I don't want to compromise ground clearance. ..

Sent from my GT-I9300 using Tapatalk
 
Yeah both US companies, but I'm in Australia so used to factoring postage costs for most things. Euro companies in Spain such as motocrosscenter or 2tracing might have some parts that help out too. Tall seat should definitely help uncramp the knees in the sitting position.
 
welcome Spooley!

don't want to be the bad guy here, but i think you are shorter than Knighter and while he does not ride a GG he rides all his bikes with stock handlebar heights and seats so suggest you stand up more (and when you sit for a corner your centre of gravity will be lower as well. So practice standing up it will benefit you in the long run!-)

For parts you can also contact www.trialendurodirect.com in the uk. i think they had some pipe guards on their website, but the P3 or the one Wence posted about from Oz are better, you could also try to find someone that stocks a hyde guards, not sure who their uk distributor is though (http://hyde1.mybigcommerce.com/gasgas-ec-250-300/)
 
I have a local supplier that will supply some aftermarket parts tell what ye think of this my bike is a 07 ec 300..hard to tell from the pic but ye might know better? uploadfromtaptalk1395764940269.jpg
 
Any luck with the fmf pipe guard, looking for one myself. Any advice for best make/models etc? I presume the aluminium aren't great and carbon is the way to go?
Cheers
 
I bought a universal one and I wasn't worth a crap.. my pipe is fairly banged up so I don't see the point of spending big on a carbon guard until I fix the pipe. . Carbon is definitely the way to go but I will cost u.. plus p&p you know what that's like here vat and so on... Did you get my message. ?? Get in contact with myself or the Italian and we'll arrange a day's riding somewhere
 
You must log in or register to reply here.

Similar threads

V
GasGas 2018 E-Start vs new Rieju E-Start
Replies
6
Views
322
webmaster
webmaster
Wbdisco
Rekluse back to Manual
Replies
6
Views
2K
Wbdisco
Wbdisco
B
2018 XC300 vs 2019 Flywheel - are they the same?
Replies
5
Views
2K
BMG
B
M
2002 EC300 no spark - new CDI box ?
Replies
3
Views
1K
(F5)
(F5)
SS109
E-start Help
Replies
13
Views
3K
Jacob 'Berg
J
Back
Top