thumperrider1
New member
Anyone know what the thread pitch is on the Ohlins 888 shock? Is one full turn equal to 1mm?
Ohlins on six days thread pitch?
- Thread starter thumperrider1
- Start date
i don't think so.
see my last post on this thread http://www.gasgasrider.org/forum/showthread.php?t=10430&page=4
to see how ohlins suggest you should measure the preload (the spring length when fully open is 270mm)
see my last post on this thread http://www.gasgasrider.org/forum/showthread.php?t=10430&page=4
to see how ohlins suggest you should measure the preload (the spring length when fully open is 270mm)
pistol
Silver Level Site Supporter
888 shock settings
I found this on the ohlins 888. Pretty interesting I thought. View attachment MI_GG888 txt.txt
Sorry I had to convert it to a txt file instead of the original pdf. Send me an email if you now how to to convert it from a pdf. motivationft@yahoo.com.
Alan
I found this on the ohlins 888. Pretty interesting I thought. View attachment MI_GG888 txt.txt
Sorry I had to convert it to a txt file instead of the original pdf. Send me an email if you now how to to convert it from a pdf. motivationft@yahoo.com.
Alan
Last edited:
do you have a sag/spring problem?
if so post your static/dynamic sag on the rear and i can give my data as i recently had to change spring to get to the recommended sags.
you can follow my post in the other thread as get all the info i got from Ohlins sweden head technician.
cheers.
if so post your static/dynamic sag on the rear and i can give my data as i recently had to change spring to get to the recommended sags.
you can follow my post in the other thread as get all the info i got from Ohlins sweden head technician.
cheers.
thumperrider1
New member
Thanks guys. I was just trying to get the preload set to 8mm without taking the shock off and measuring since it's a pain to get the shock off.
