Ohlins TTX Mounting Instructions

rod

New member
I think what I'm after is FGGG1082 (forks) and GG1082 (shock) mounting instructions to suit the 2010 Nambotin replica. Can anyone tell me where to find these model specific mounting instructions, all I got with the bike were Ohlins owners manuals which give no recommendations for clicker settings or much else for that matter.
When I bought the bike(new) back in 2010 I asked GG Australia for these manuals, but was told they were not supplied with the bikes and should try Ohlins Australia.

Then I emailed Steve Cramer (Ohlins, Australia) requesting same, never got a responce, that was 3 years ago.

Did not worry about it too much back then, rarely rode the bike and thought the suspension was great compared to the ole 45mm zokes, which it was.

Lately I'ved realised the front end in particular could do with some tweeking.

Can anyone help with these mounting instruction booklets, please.
 
I think what I'm after is FGGG1082 (forks) and GG1082 (shock) mounting instructions to suit the 2010 Nambotin replica. Can anyone tell me where to find these model specific mounting instructions, all I got with the bike were Ohlins owners manuals which give no recommendations for clicker settings or much else for that matter.
When I bought the bike(new) back in 2010 I asked GG Australia for these manuals, but was told they were not supplied with the bikes and should try Ohlins Australia.

Then I emailed Steve Cramer (Ohlins, Australia) requesting same, never got a responce, that was 3 years ago.

Did not worry about it too much back then, rarely rode the bike and thought the suspension was great compared to the ole 45mm zokes, which it was.

Lately I'ved realised the front end in particular could do with some tweeking.

Can anyone help with these mounting instruction booklets, please.

Did you goggle this?
Literally the first thing that came up when searching the part number is http://www.andreanigroup.com/System/39377/File_FGGG 1082_1.pdf
which is specific to the EC300, Nambotin or not, the chassis and engine is the same.
How do their specs compare to what your running?
 
Thanks Noobi,

Seriously, I didn't mean to come across as lazy.
I was too busy punching in everything Ohlins and not specific part #'s.
I'm old at 51 and will use that as an excuse. Thanks.

Now for some info on the shock, please.
 
If you get stuck rod I have the docs for the GG1182 shock. I've also had good results requesting such things directly from Ohlins USA. Steve Cramer wouldn't even reply to my email when I was trying to buy a set of TTX carts from him. Beyond a joke.
 
Back
Top