Parting out '07 300 EC

LAWMAN

Platinum Level Site Supporter
Right after I spent serious $ freshening up this bike, I found out that it needs a total bottom-end rebuild (isn't that the way it always goes with dirt bikes?). That's more $ than I want to put in an '07, so I am going to part out the major parts. I'm not planning to mess with the smaller stuff, but if there is anything particular that you need, let me know & we'll work something out. I haven't figured out how to post pictures, but I can email them. For sales or shipments out side the continental US--contact me & we'll work something out. I'm in US zip code 38017. All prices are OBO, I just need to clear the clutter in my garage.

*This 1 has the small ignition, so I added a flywheel weight.

1. Twin Air aluminum filter cage w/brand-new filter element: Lists for $149.95, I'll sell for $85 shipped in con US. Cage is as-new, filter is new in the bag from Gofasters.

2. Rekluse clutch basket: This stops the grinding & squealing that the stock clutch always did. I used it for 3 rides, a total of a few hours. I'll sell it installed with the backing plate/gear that it bolts up to. Lists new for $249, I'll sell for $169, shipped in con US.

3. Moose Off-road clutch kit, with springs & plates, both steels & fibers. These have the same few hours on them as the basket, they are as-new. Dennis Kirk lists them for $229.95, I'll sell for $169, shipped in con US.

4. 300 cylinder, head & piston: These are in fine shape. The bore is bright & shiny with no gouges, chips or scrapes in the finish. Piston is fine. There is just the beginning of a little blow-by on the piston, so it will need new rings. $300.

5. Bottom end: No clutch, see above. It needs to have the bearings, seals & gaskets replaced. I'll sell for $100 + actual shipping, or work out a package deal for the top & bottom.

6. Wheels: In excellent shape. Front wheel bearings have an enduro & 3 or so rides on them. Rears have just a couple of rides. I'll ship with rotors attached. I don't know what they are worth; make an offer.

7. Nissin brakes: In excellent shape. Front pads have 1 enduro & about 3 rides on them, the rears another ride or 2 than that. Make an offer if interested.

8. Sachs rear shock: Re-valved & re-sprung by LTR for a 200-lb. fast B-level rider. It's a terrific shock. $300 + shipping? Or make offer. Stock spring included.

9. Marzocchi 45mm fork: Re-valved & re-spring by LTR as above. Works great. $300 + shipping? Or make offer. Stock spring included.

10. FMF Turbine Core II spark arrestor/silencer. In OK shape & never failed a sound test but I am sure it could use a re-pack. $50 + shipping.

11. Controls? Electrics? Seat base & stock foam? Frame? Sub frame? Swing arm? Etc? If anyone is interested in these, please let me know & I will pull them, get some photos, & work out a deal with you.

Thanks

John
 
PMs sent on the top end, bottom end, plastic, radiators, subframe, clutch pressure plate, swingarm, linkage, & fork.

Wheels are tentatively sold, subject to approval of pics. YZ kicker is sold. Kick stand is sold & will ship today.

a couple of parts I forgot about: Clutch master, hose & slave, sold as a unit, $80 shipped in continental US.

radiators: Good shape, not perfect, $75 shipped for the pair.

brakes: re-reading my original past, I see that it might sound as if I am selling just the pads. I'm selling the whole assemblies, lever (pedal)/master/slave/hose/pads/rotors. $95 each, shipped. the rear pedal parts are worn, but I have the new clevis & that other piece, whatever it is, & will include those.

All prices are OBO.

Thanks!

John
 
Can I get pics & prices of the subframe, seat & plastic? wayneraia@gmail.com Thanks!

I'll have to get some pics. subframe is A-OK; front fender is good; side panels are OK; rear fender is battered & had holes drilled in it for tool bag & for access to muffler bolts. it's not worth much, I have been telling guys who might want the rear fender that I'll throw it in with some other stuff, it's not worth the shipping cost by itself.
 
I think I've responded to all the posts & PMs, but I won't lie, this gets confusing between the 2 formats. If anyone is owed a response, maybe the best way to let me know is by email at :

jbranson@bakerdonelson.com

thanks

John
 
the sub frame, rear fender, air box, seat base, foam & cover & silencer are sold.
 
Back
Top