Power valve spacers

[Banditpowdercoat]

I have a CNC mill at home and wondering on the power valve spacers. Do people still use/need? I have made for my 98. 250. Not many other gg owners here I. Western Canada but if there's a want, I can make.

Sent from my iPhone using Tapatalk

 

[Gasser Nate]

You could make some for the other side too to get rid of that silly 5mm cardboard gasket.

 

[Banditpowdercoat]

You could make some for the other side too to get rid of that silly 5mm cardboard gasket.

5mm gasket? On the linkage side? My 98 is just a regular gasket on the linkage cover.
Have you a pic?

 

[Neil E.]

If you really want a challenge there may be owners of 2011-2014 estart models who would like a spacer that incorporates the starter motor mount. The spacer might have to project out beside the starter motor to achieve the required volume.

 

[Jakobi]

5mm gasket? On the linkage side? My 98 is just a regular gasket on the linkage cover.
Have you a pic?

Same shape. The 2018 model they changed the linkage so the cover requires more clearance.

 

[Nocams]

2015 > requires the thicker gasket to clear the ball joint actuated bellcrank.

I?ve been using 6mm Delrin for years as the spacer.

 

[Gasser Nate]

2015 > requires the thicker gasket to clear the ball joint actuated bellcrank.

I?ve been using 6mm Delrin for years as the spacer.

I took a educated guess at the thickness! Save me an off cut will you?

 

[Nocams]

I?ll even make it for you matey!

How?s the carcass going? You healed yet?

 

[Gasser Nate]

I?ll even make it for you matey!

How?s the carcass going? You healed yet?

Cheers bud!
Yep all good to go when I get some time off!

 

[Jakobi]

You two a good fellas! I'll have a beer for each of you after a good ride today!~

 

[CanadianDave_EC250]

I?ll take one

How much delivered to alliston Ontario?
2001 ec250

 

[JAD]

I would love one but I am in the UK...