Rear brake pedal bearings and bushings crossover ?

[poelinca]

Are there any crossover bearings, bushings, seals and washers for the rear brake pedal ?

Mine are broken, literally split a bearing apart, the seeger washer and bushings on that side can't be reused anymore. I'm looking at the whole "kit" so to speak, 32 thru 35 in the pic bellow

I could order from Spain as I usually do, however I do have everything else I need for the spring clean-up so I'm looking to save on shipping costs.

 

[Gasser Nate]

The bearings can be bought from a local bearing place easy as. The other stuff might have to be machined up on a lathe if you need them in a hurry.

 

[poelinca]

The bearings can be bought from a local bearing place easy as. The other stuff might have to be machined up on a lathe if you need them in a hurry.

Taught so, I ended up placing the order from Spain. I'm not close enough to a shop that can machine the bushings.

Thanks,
Dorin

 

[(F5)]

My arrangement were a bit worn so I used a push in slide bush and machined a piece a bit larger to be a better fit ti the frame hole that was a bit flogged out.