Have an '01 EC250 with an Ohlins rear shock and WP forks. After softening the compression in the forks, dropping them 2 cm in the clamps and dialing in more compression for the rear, I am thinking I need a stiffer spring for the rear shock. Preload has perhaps another 1-2 cm left on the current spring and am thinking I should not be using all of it to get the desired results. The current spring is marked 596-09 MA038 I THINK. Not completely sure if I am able to read the markings correctly as they may have rubbed off or been bashed by debris during riding but hope I gave enough there so that one of the more knowledgable among this group can offer some insight.I weigh about 210 with gear on and want more cush for the technical stuff. Big air and/or G-outs and me do not mix. Would appreciate knowing what spring I have now and which, if any, I should replace it with. Anybody who has one and is looking to part with it would be icing on the cake.
Many Thanks!
