Remote Air bleeders?

[95jersey]

Getting sick of removing my bars to bleed the air out of my forks. Does anyone make remote bleeders for the Zooks?

 

[imsimon]

Just turn the fork caps 180 degrees so the + and - are upside down this allows you to have access to them. There m4 x 0.7 size which is same as ktm wp ones

hope that helps!

 

[95jersey]

Just turn the fork caps 180 degrees so the + and - are upside down this allows you to have access to them. There m4 x 0.7 size which is same as ktm wp ones

hope that helps!

I have my bars mounted in the forward position which is dead center under the bars...no way to get in there regardless of how I spin them around.

 

[desertgasser300]

go to the motion pro site and order the micro bleeders

 

[95jersey]

go to the motion pro site and order the micro bleeders

I called them and they said beyond the actual Metric bolt size there is a specific "chamfered" section that recesses into the top of the forks to create a seal and the Zooks may not have the same recess as the WP's.

So is anyone running these or maybe another brand they know works?

 

[desertgasser300]

I have them on the same forks as you do.

 

[95jersey]

I have them on the same forks as you do.

which model, they have 2 versions for the KTM.

http://www.motionpro.com/motorcycle/tools/category/micro_bleeders/

 

[desertgasser300]

These

http://www.motionpro.com/motorcycle/tools/category/micro_bleeders/#/motorcycle/partno/11-0080/

 

[95jersey]

These

http://www.motionpro.com/motorcycle/tools/category/micro_bleeders/#/motorcycle/partno/11-0080/

Sorry to be such a PITA, but your link takes me to the same place mine did and it has multiple options to choose.

Are they the Micro Bleeder, M4x0.7, WP 4860 MXMA, 4CS Black

or

Micro Bleeder, M4x0.7, WP 43-48 W/O Ext Preload, Orange

Each are for different years and fork types.

 

[desertgasser300]

Sorry to be such a PITA, but your link takes me to the same place mine did and it has multiple options to choose.

Are they the Micro Bleeder, M4x0.7, WP 4860 MXMA, 4CS Black

or

Micro Bleeder, M4x0.7, WP 43-48 W/O Ext Preload, Orange

Each are for different years and fork types.

You are a PITA, just kidding! Try this one.
http://www.motionpro.com/motorcycle/partno/11-0080/

 

[95jersey]

You are a PITA, just kidding! Try this one.
http://www.motionpro.com/motorcycle/partno/11-0080/

Thanks! It is the black one.

 

[_Hammy]

Is anyone aware of bleeders that suit 48mm Sachs?


Sent from my iPhone using Tapatalk