Skidplate for '05 Pampera/EC50

[ArmPump]

Any help here as the Pampera I picked up for the Mrs has no skidplate. I hear the EC50 is the same/similar chassis and one for that might fit.

Thanks in advance.

 

[GMP]

My wife has an '02 250 Pampera and an EC250/300 skidplate goes right on. Its been awhile and I don't remember if I had to redrill a rear mounting hole or not but the fit is fine, I can check tonight. Mine is an older plate I got from Smackover motorsports, I beleive was originally made by either Flatland or Utah Sprotcycles. The cradle is close enough so any EC plate should work, and the Pampera motor is narrow so there is no clearance issues.

 

[ArmPump]

My wife has an '02 250 Pampera and an EC250/300 skidplate goes right on. Its been awhile and I don't remember if I had to redrill a rear mounting hole or not but the fit is fine, I can check tonight. Mine is an older plate I got from Smackover motorsports, I beleive was originally made by either Flatland or Utah Sprotcycles. The cradle is close enough so any EC plate should work, and the Pampera motor is narrow so there is no clearance issues.

NICE! Thanks for the reply.