Spooge

[Lildawg]

Got a lot of spooge coming out of the hose from the power valve, anything to be concerned with or keep an eye on, or is it normal conditions? Thanks guys

 

[roostafish]

Absolutely normal. If it bothers you, remove the pv cover and clean it out. A piece of cardboard on the floor will keep your garage tidy.

 

[Lildawg]

Thanks Roostafish. Just the answer I was looking for.

 

[bchatt]

My LH side PV cover drain came zip tied from new. I cut the zip tie and wound in a M3 bolt, about 10mm long, into the bottom of the tube. Every time I clean the airfilter (or something like that) I unscrew the bolt and let the tube drain onto a rag. Usually get a puddle 2 or 3 cm wide.
I use Motul 800 which is an ester based synthetic oil, and does seem to create alot of spooge. I'm happy to see it.

 

[gasser]

I use Motul 800 which is an ester based synthetic oil, and does seem to create alot of spooge. .

Motul 800 must have a very high flash point. I can't run it in my 300 at 44/1 mix ratio. It blows spooge everywhere and will eventually foul plugs if riding slow technical stuff. Maxima K2, Champion Waterpumper, and Amsoil Dominator or Interceptor are all good oils with a lower flash point.

 

[Brian]

Motul 800 must have a very high flash point. I can't run it in my 300 at 44/1 mix ratio. It blows spooge everywhere and will eventually foul plugs if riding slow technical stuff. Maxima K2, Champion Waterpumper, and Amsoil Dominator or Interceptor are all good oils with a lower flash point.

Motul 800 does have a very high flash point. Which is why I stick with Motul 710.