Stock settings for '99 EC200? HELP!

[RD350]

Just rebuilt the front and rear suspension to stock specs, no revalving. I found the manual for the front marzocchi forks, conventional. It says to not go farther then 2 clicks from the factory setting in either direction.

What is the stock factory settings?

I don't have a manual for the ohlins rear shock. Does anyone know where to start with it?

 

[Jakobi]

I'd count all the clicks and start somewhere around the middle. Start slow and dial it in with the feedback the bike gives you.

 

[RD350]

Thats what I've been doing. What to see where I am according to where gas gas thinks I should be.

The front feels a bit harsh/stiff/firm in the middle of the compression adjuster. Went out 3 clicks from centered and it is better but not as soft as I like it. At 5 clicks out, from centered, on compression it starts to get a nervous slight head shake.

Also, the front wants to washout. No grip in corners front slides all over the place. I run S12s that are still very good, only about 2 hrs on them.