Supermoto.
- Thread starter wence
- Start date
gassergrant
New member
Hi i used ccm 404 wheels. it came with a ccm bracket and i used a brembo caliper and master cylinder from a ktm or husky i think. i just swap it around.
i got some spacers made for the front
the back i changed the larger wheel bearing for the gg one and added the spacer that sits in between the two bearings and it all fits
the biggets tyre you can it on the rear is a 150 or it will rub on the swing arm
i got some spacers made for the front
the back i changed the larger wheel bearing for the gg one and added the spacer that sits in between the two bearings and it all fits
the biggets tyre you can it on the rear is a 150 or it will rub on the swing arm
gassergrant
New member
this is my 300 with the ccm wheels
gassergrant
New member
Hi Mark
i found my wheels on ebay, ccm is a British made bike, not even sure they are still being made, not sure if you guys imported them ether.
they use ajp hubs that is why i went for them so i new there would not be much to mod.
Talon make hubs for gg and rims the are a few to choose from. i just did not want to spend the same amount on wheels as my bikes worth lol
early ktm wheels i think may fit and Suzuki drz sm wheels might, huskys have the same spindle size i think and used ajp hubs. it just a case of research on what has the same spindle size.
regarding the brake again husky,ccm or early ktm bolt straight on. there is a fella here in the uk that can get a bracket made to fit the nissin caliper (?50 ruffly) as for wheel spacers i got my mate to turn me some out on his lave.
i will get all the part number and post them in a few days and the bits you want as well Harry
i nearly gave up on this, but fell together thank god, the bike is the nuts on sm wheels. well worth the hassle, if you guys need any help just ask an i will do my best
grant
Grant
i found my wheels on ebay, ccm is a British made bike, not even sure they are still being made, not sure if you guys imported them ether.
they use ajp hubs that is why i went for them so i new there would not be much to mod.
Talon make hubs for gg and rims the are a few to choose from. i just did not want to spend the same amount on wheels as my bikes worth lol
early ktm wheels i think may fit and Suzuki drz sm wheels might, huskys have the same spindle size i think and used ajp hubs. it just a case of research on what has the same spindle size.
regarding the brake again husky,ccm or early ktm bolt straight on. there is a fella here in the uk that can get a bracket made to fit the nissin caliper (?50 ruffly) as for wheel spacers i got my mate to turn me some out on his lave.
i will get all the part number and post them in a few days and the bits you want as well Harry
i nearly gave up on this, but fell together thank god, the bike is the nuts on sm wheels. well worth the hassle, if you guys need any help just ask an i will do my best
grant
Grant
gassergrant
New member
soz to keep you gents waiting, will get the info tomorrow for ya. just have not stopped
grant
grant
wence
Bronze Level Site Supporter
I just bought a set of Morad motard wheels and all the kit as a kit from motocrosscentre in spain.
http://www.motocrosscenter.com
Antonio was great to deal with and they come in pretty well priced too.
Cheers Mark
http://www.motocrosscenter.com
Antonio was great to deal with and they come in pretty well priced too.
Cheers Mark
Jakobi
Super Moderator
Nato. I was going to get the Cervantez 2011 plastics kit for my 2010 model to keep as spares for the next freshen up. The price of the kit was alright, but the postage is with Fedex and you pay. I think it cost me something like 65 euro postage just for a heap of gaskets and a couple other small things. Hardly a large order by any means. With the plastics thrown in the postage went up to 150 euro. Depending on the exhange (which has improved since I ordered of course 
) it works out around $180.
Then again getting my shock back from Ohlins is going to cost an arm and a leg with UPS, and they've had too many issues with USPS so the cheap options is out.
) it works out around $180.Then again getting my shock back from Ohlins is going to cost an arm and a leg with UPS, and they've had too many issues with USPS so the cheap options is out.
wence
Bronze Level Site Supporter
As Jake says , it was fairly dear $ 150 euro( $192.00Aud).
That is for wheels with tyres , brake discs, rotor and brake bracket, so I guess that is not too bad.
Cheers Mark
gassergrant
New member
this is what i have for my sm
front 17x3.5 inch with a 120/60/17
rear 17x4.25inch tyre 150/60/17
both are pirelli diablo rosso 2 you need the softest tyres in these size or you cant get the heat in the tyres, the 150 is the biggest you can fit with out rubbing keep the chain long as it will rub in the swingarm. i use two chains for my wheels
the front brake caliper is a brembo 22.5381, the bracket did not have any part numbers on
http://www.ebay.co.uk/itm/2002-CCM-...34?pt=UK_Motorcycle_Parts&hash=item2a21038b52
above is the caliper set up im using for now
the ktm lc4 sm use the same set up, im looking at getting a 4 pot brembo but will need a bracket made
front 17x3.5 inch with a 120/60/17
rear 17x4.25inch tyre 150/60/17
both are pirelli diablo rosso 2 you need the softest tyres in these size or you cant get the heat in the tyres, the 150 is the biggest you can fit with out rubbing keep the chain long as it will rub in the swingarm. i use two chains for my wheels
the front brake caliper is a brembo 22.5381, the bracket did not have any part numbers on
http://www.ebay.co.uk/itm/2002-CCM-...34?pt=UK_Motorcycle_Parts&hash=item2a21038b52
above is the caliper set up im using for now
the ktm lc4 sm use the same set up, im looking at getting a 4 pot brembo but will need a bracket made
gassergrant
New member
ops forgot the rims are BERH and the hubs AJP front disc 320mm and back same size
Jakobi
Super Moderator
So roughly 400 bucks delivered for the replica plastics. Not bad really but postage is never cool
Yeah over all the price is still reasonable. I paid $200 for just stickers a while back so to have factory stickered plastics from front to back for a bit more is a shithot buy. If I had of needed them I would have pulled the trigger but with only a few beers under the belt and no need I decided to wait it out.
Antonio_MotocrossCenter
New member
Just registered to say hi to all of you and specially to Mark, hope the tires arrive there soon and you post back some cool pictures of your renewed bike !!
Thanks for your support guys !
Antonio
