WTB: Dead Stator, Rotor & Pulser

[blitz11]

Greetings.

Spring is rapidly approaching (well, hopefully, here in MN), and my "real" job is kicking my butt. I need to get my good stator and rotor into my bike, which means that development on my CDI has stopped. I am looking for a dead stator/plate, pulser, and rotor i can use for further development while the good rotor/stator is in my bike. I am hoping that things free up in a month or two.

If you have one to sell, can you please let me know?

Dead KTM stuff will work, too. As long as it is Kukosan.

Thanks.

blitz

 

[GMP]

Craig,

Did you ever get the PV governer from widebear? I found another guy with one if not.

BTW, you probably know this, but the KTM stator will go on the GG backing plate and work in the bike as well.

I have a spare 2K-2 system I could send you for development work on the "Blitz Box". It sits on the shelf as a backup, and for my new bike (replace 2K-3) hopefully this summer.

 

[blitz11]

Hi Glenn,

I did get the the governor from Widebear. It sits on my bench unopened 'cause I don't have time to get to it now. Ugghhh.

I appreciate the offer, but my spidey-sense tells me to wait a bit for a toasted set. I can rewind the HV coil, if need be. I'd hate to have something happen to your system. I'd feel horrible about that.

Let's hold on for a little while. For the next two weeks, i'll be super busy, so i wouldn't be able to get to it before then. If things go well, once i take off the ignition, maybe i can test the PV governor. Maybe even see the effect of shimming the preload to see how it affects actuation.

Thanks again.

craig