'08 EC250 rear brake pads. Not CR compatible

[MNKeith]

Searched. Not finding anything. My '08 has smaller rear pads than the '97-01 CR interchange. Same shape, just a bit shorter. Any suggestions on what fits?

 

[noobi]

Late model yzf/rmz/kxf.

 

[gasser]

A lot of brake pad makers use the same 3 digit numbers for fitment. That is true for EBC and their numbers for 2000-2008 is #131 and 2009-2013 is #367 for the gasser rear pads. EBC uses letters to denote what the pads are made of but the 3 digit # is what you need for fitment.

 

[MNKeith]

These were 131. I'll try a late model Japanese bike, thanks.

 

[rosco]

I use the stock Yamaha pads on the 11 gasgas and newer. I would guess the 08 might take the same. Rear part# is 1C3-W0046-10-00 and front part# is
5MV-W0045-01-00.

 

[Jakobi]

Like everyone else has said. Rears will cross over with Yamaha. My old 04 WR250F used the same front and back as both my 2010 and 2013 EC's. The newer model Yamahas use the same rear from memory, but the fronts may have changed. www.metalgear.com.au has a search which lists the part numbers. A little playing around lets you work out which particular models use the same ones. Gas Gas is listed

 

[MNKeith]

Great, thanks guys.