lukemillar
New member
I'm in the middle of stripping my forks to replace the seals and have got a different number of nylon spacers between the 2 fork legs.
The RHS has 1x9mm spacer and 1 x2.5 mm spacer between the fork cap and the spring.
The LHS has 2 x 2.5mm spacers and 1x 1.5mm spacer
So, apart from one fork having 3 spacers and the other only 2, the combined height of the RHS is 3-4mm higher than the LHS!
Is this as WP intended? The parts fiche quotes all three sizes of spacer which I assume is for different preload, but I'm guessing that both forks should be the same!
Any insight would be great
Cheers
Luke
The RHS has 1x9mm spacer and 1 x2.5 mm spacer between the fork cap and the spring.
The LHS has 2 x 2.5mm spacers and 1x 1.5mm spacer
So, apart from one fork having 3 spacers and the other only 2, the combined height of the RHS is 3-4mm higher than the LHS!
Is this as WP intended? The parts fiche quotes all three sizes of spacer which I assume is for different preload, but I'm guessing that both forks should be the same!
Any insight would be great
Cheers
Luke
