2004 GasGas 300 ec frame guards

[Packman]

Does anybody know of a good set of frame guards for a 2004 GG 300 ec ....

Ive got some long plastic / carbon look ones of Fleabay for ?30.00 but they dont fit the bends are in the wrong place ....

Anybody ?

 

[djroggen]

They haven't changed the fitment until 11. I put 11 frame guards on my 04.

 

[motogroove]

On my 2001 I used:
Go FaSTERS part number
be250520030ct
Frame Protection2FW-501
(was $29.47 back in 2011)
I had to trim it just a little with a utility knife. Around the master cylinder, I think.

 

[nknudsen]

I'm using the 2011 guards on my 00'. I had to drill out my swing arm pivot bolt some to fit the male locating plastic pins in place that are molded into the guards. The newer bikes use a larger/different pivot bolt than the old bikes.

 

[Fred1956]

+ a slight difference when they changed to the 'B' frame but that is an easy Exacto knife project

 

[nknudsen]

+ a slight difference when they changed to the 'B' frame but that is an easy Exacto knife project

It's a very easy trim job with a knife because it's just a plastic tab and not a full molded plastic ridge. This is where the guard is fitted into the valley of the B frame.

 

[thejackrabbit]

I've been looking for frame protectors too, but on gofasters it doesn't allow me to add them to the cart.

 

[eff]

I've been looking for frame protectors too, but on gofasters it doesn't allow me to add them to the cart.

Order by phone. I always preferred talking to the guys, especially when it was Mark on the other end of the line.

 

[Rod Overstreet]

Does anybody know of a good set of frame guards for a 2004 GG 300 ec ....

Ive got some long plastic / carbon look ones of Fleabay for ?30.00 but they dont fit the bends are in the wrong place ....

Anybody ?

Pretty sure I have a pair of those at home. I'm out on the road this week but when I get back, would be glad to send photos of them if you think it might help. They're still in the bag, with the part #.

 

[gasser]

Some company made aluminum guards for the older bikes, my son has a set on his 01 250 gasser.

 

[spooly]

im looking for frame guards for my 07 300 .. motocrosscentre.com don't supply um for the 07.. will the more modern guards fit????

 

[Elvis74]

Buy the original one, gasgas has the models before 2011 they fit all old style frames.

 

[spooly]

can not find um anywhere I even tried gasgas uk and numerous dealers and even ebay failed ....

 

[Elvis74]

Here they are
http://www.trialendurodirect.com/products/15_17/EC_Plastic_frame_guards_96.html

 

[spooly]

there out of stock.