2007 to 2011 Frame Compatabity

[smallpuffydog]

I apologize for asking this question since it looks to be all but answered in a recent thread, but...I could use just a little more reassurance that I am not setting myself up.

I am sereously considering swapping the frame out on my 2007 300 for an 2011 frame.

Other than plastics is there anything that I will not be able to swap between the two years such as triple clamps, subframe, swing arm, rear brake...the only thing that I could really come up with are the plastics (air box & frame guards)
Thanks,
Matthew

 

[smallpuffydog]

I apologize for asking this question since it looks to be all but answered in a recent thread, but...I could use just a little more reassurance that I am not setting myself up.

I am sereously considering swapping the frame out on my 2007 300 for an 2011 frame.

Other than plastics is there anything that I will not be able to swap between the two years such as triple clamps, subframe, swing arm, rear brake...the only thing that I could really come up with are the plastics (air box & frame guards)
Thanks,
Matthew

Well if everything goes as planned I will be able to post if I had any issues and what I needed to do in order to solve them...

 

[GMP]

If you have a damper tower it will not fit as the steering neck is smaller on the '11 frame.


Sent from my iPad using Tapatalk HD

 

[smallpuffydog]

If you have a damper tower it will not fit as the steering neck is smaller on the '11 frame.


Sent from my iPad using Tapatalk HD

Thanks Glenn.

No issue with the damper (I dont run one).

I'll have to check part numbers to make sure that the bearings in head set are compatible.