2009 450fsr sachs shock rebuild kit

[schlitzy]

Anyone know where I can get all the parts to service a Sachs shock on a 2009 450fsr? In the States if possible.
Thx

 

[rvktm]

i used a skf seal block on a 010 two stroke one or look to see if racetech do a block did look at fitting a different seal to the std block showa kyb wp use the same seal on there 18 mm shock good luck

 

[Jakobi]

Anyone know where I can get all the parts to service a Sachs shock on a 2009 450fsr? In the States if possible.
Thx

The sachs seals are pretty resilient.. Is yours actually leaking when under full pressure? How does the shaft look?

Getting a seal or complete seal head for a Sachs can be a pain in the ringbit... Most tuners will mill the stock seal head to take a KYB/Showa seal, otherwise SKF do a complete seal head. You just need to be sure on which one you need. Sachs use 16 and 18mm shafts.. some use top out spring assemblies, while others have a bump stop on the seal head. Few different height seal heads getting around too!