2012 footpegs

[mcnut]

Does anyone know if the 2012 models can still use aftermarket footpegs for a YZ250? I'm ready to order some parts.

 

[thumperrider1]

I am in the same boat. I used the moose hybrid 1/2 offsets for the YZ250 on my 2011. Will try the same on the 12.

 

[twowheels]

The 2012 footpeg clevis has a 30mm span - the pivot pin is 10mm. A quick visual of the right side peg reveals that the clearance cut-away to the brake pedal is gone (naturally). My money is on the older Fastway and Moose hybrids bolting on, but I haven't tried it yet.

Unfortunately the fiche won't tell you much - there's a new part number for the assembly ... but both sides have the same number.

 

[GMP]

Hope so, I'd like to swap the Pivot Pegs from my '07 over.

 

[wence]

Just went out into the shed and had a look.I had the yz pivot pegs off of the 07 and matched them against the new 12. I reckon( without actually putting them on ), that they will fit.
The pin is ok, width is good and they seem like they will sit correctly.
I would say you can use them guys.....
Cheers Mark

 

[Fred1956]

Just went out into the shed and had a look.
Cheers Mark

It has to stay in the shed !?!?!?!? That just ain't right.....

 

[wence]

Hey, I had enough trouble convincing the wife I needed it so I don't want to push it.
If I was a single bloke it would live in the loungeroom next to the beer fridge.
Cheers Mark

 

[GMP]

My neighbor's new '12 Ducati Monster 1100 is in his living room. Yeah he is single. I'll try and get a pic.

 

[singletracker]

My Gas Gas has its own heated and air conditioned room. Heck, I don't even have my own room???

 

[Wimpy525]

Just picked up my 12 trying to make this thing bigger. Have run Fastway pegs in the low position on my 525, but thinking of trying the pivot pegs. How to tall guys like pivot pegs?

 

[Tlineman]

I have the pivot pegs on my 11' and love them. I reversed the pin to lower them aswell as installed a tall seat and bar risers. Makes for a roomy feeling bike that fits me like a glove. I'm 6'4" 215lb in street clothes.

 

[thumperrider1]

When I went to a wider peg I really noticed how short the shifter was. Do you notice this with the pivot pegs? I ended up using the 1/2 inch setback moose hybrids on my 11 and still could have used maybe a +5 hammerhead shifter. That's with a size 8-9 boot.............

 

[shark4465]

i put the fastway pegs from my 05 yz on my '12 300 fit fine

 

[mcnut]

Cool. I already ordered some.

 

[thumperrider1]

I ordered another set of 1/2 inch setback moose hybrids again. Also ordered a hammerhead +5mm shift tip and will get it machined to fit the stock shifter.

 

[AZRickD]

Ah, poo. Look what happened to my 2005 GG brake-side peg while setting up the Sheridan Mountain Showdown race course this weekend.

 

[AZRickD]

Sooo, does the Moose (Hybrid and/or Pro) pegs fit both the 2005 and the 2013?

I have a few months to go before taking delivery of the '13.