2014 200 EC Vibrates

[Rob1965]

When I pin this bike, there seems to be lots of vibration especially where I grip. Anyone else have this issue? After riding for a while, my hands are numb, however in the lower RPM, there is no problem. Thanks for your help.
Rob

 

[Fred1956]

When I pin this bike, there seems to be lots of vibration especially where I grip. Anyone else have this issue? After riding for a while, my hands are numb, however in the lower RPM, there is no problem. Thanks for your help.
Rob

I would check engine mounts for proper tightness/torque first. If they're good and tight then loosen them all at the same time and then retorque to correct spec, including the swing arm pivot

 

[Simmo737]

As above is correct, also start rye torquing at the swing arm and move forward.

 

[Moto7man]

Use a sharpie pin and mark your torqued bolts to see if they loosen over time.

 

[Phaeton]

I will have to check the engine bolts on the wifes KTM 200 it vibrates like crazy also.