2014 Linkage Kit Part No.

[brads1725]

Anyone got a part No. for the linkage bearings and bushings for a 2014 EC250 with the reiger?
Been looking but a few places are showing no stock and I can't pull a decent part no. to search by
Cheers

 

[Anders]

All the bearings are std caged needle roller bearings you can buy at any bearing shop. The bushings are gasgas specific, part numbers are in the parts list. There is a mix of o-rings and traditional seals.

I will check and come back with the numbers later today.
I had no problems sourcing any of the parts last time I rebuilt the rear end, one year ago. I will do it again in a few weeks, but have not bought any parts yet.

Sent fra min YAL-L21 via Tapatalk

 

[brads1725]

Yeah got the needle bearings and seals all good but no the bushings. 2 were OK but 1 was badly rusted and pitted. Had to re use, will get some new ones ahead of time next time. Got some stuff from europe before, but they are showing no kits available. Hadn't looked into individual as its gets pricey to ship

 

[Jakobi]

I had some issues chasing the bushings in my 13 race (same linkage setup). You could size the bushings up and see if any of the after market suppliers have anything or could produce something to meet.