2018-2019 AXP Xtrem Skidplates in Red or Black

[dzhitshard]

interesting. I am most excited to try this again if you guys are actually having success with it. Oil changes are quick since I moved the bracket and drilled an access hole but the plate is noisy now and sometimes there's an oily smell to the bike because of the residue that I miss in clean up. Cheers

 

[shawbagga]

interesting. I am most excited to try this again if you guys are actually having success with it. Oil changes are quick since I moved the bracket and drilled an access hole but the plate is noisy now and sometimes there's an oily smell to the bike because of the residue that I miss in clean up. Cheers

Show that bitch who's boss!

 

[MotoHead]

Thanks guys. I guess I'll find out how it works on my bike (2018 250XC). I ordered the red Xtreme plate from Moto Center and should have it in the next few days!

 

[Jakobi]

interesting. I am most excited to try this again if you guys are actually having success with it. Oil changes are quick since I moved the bracket and drilled an access hole but the plate is noisy now and sometimes there's an oily smell to the bike because of the residue that I miss in clean up. Cheers

Another trick if you have a hole cut for oil drains is to use an old dunny roll. Put a slit in it and fit it in and slide it up against the engine. Will redirect any run off or splatter down vs into the bash plate!

Wait for the.. what's a dunny roll?

 

[shawbagga]

Another trick if you have a hole cut for oil drains is to use an old dunny roll. Put a slit in it and fit it in and slide it up against the engine. Will redirect any run off or splatter down vs into the bash plate!

Wait for the.. what's a dunny roll?

Haha I had to read that twice when I saw 'slit'!

 

[MotoHead]

Put my skid plate over the weekend. There was no way in hell it was going on with the pipe in the way so I took the extra few minutes and removed the pipe which really was no big deal. Even with the pipe out of the way I really had to man handle it to get those hooks over to the rear frame but I eventually got it on and it's a very nice snug fit! I already put it through the test over some downed trees and it worked out GREAT. Here are a few closeups, the red color is a nice touch.

 

[dzhitshard]

Show that bitch who's boss!

I'll be dagum'd. I got it on, and off with minimal effort without removing the pipe.
All I can say is that it's obviously bedded in a bit in the past 60+ hours. I nearly benchpressed the whole bike putting it on the first time, and that was with the rear clamps only attached on a single thread.

When the crank bearing went out I pulled the skid again, lickity split to ensure I wasn't picking up any noise from it rattling.

 

[shawbagga]

I'll be dagum'd. I got it on, and off with minimal effort without removing the pipe.
All I can say is that it's obviously bedded in a bit in the past 60+ hours. I nearly benchpressed the whole bike putting it on the first time, and that was with the rear clamps only attached on a single thread.

When the crank bearing went out I pulled the skid again, lickity split to ensure I wasn't picking up any noise from it rattling.

Yeah after 130ish hours mine is getting a bit loose. Pretty easy to get on & off now. It's had a hard life though! Coupla big zip ties should keep it snug.

 

[Booki]

Just thought I would update this. Recently bought the axp, currently trying to fit it - the fitment is absolutely terrible.

Seems like a good quality product but getting those hooks on the rear of the bike...no success yet.

Think I might return it, not like it's a cheap product!

 

[Gez]

I struggled the first few times, but you get the hang of it eventually. The hooks take some concentration to get in

 

[Booki]

Mine seem to just be fouling against the engine, maybe its machined incorrectly/poorly?

 

[Gez]

Intresting, definitely wasn't an issue on mine. Pictures of the offending artical?

 

[swazi_matt]

Intresting, definitely wasn't an issue on mine. Pictures of the offending artical?

if you've ever had to fit a hyde skid plate everything else feels like it fits like a glove lol

 

[Gez]

if you've ever had to fit a hyde skid plate everything else feels like it fits like a glove lol

Thanks for the heads up