Clutch line?

[wence]

Hey Guys ,
Dropped the bike stupidly on the weekend and knocked the barkbuster into the clutchline.
While moving the barkbuster back it pulled down on the clutch line and fractured it.
Where is the best place to buy an 07 Ec 300 clutch line?
From reading the searches I have found that Dot 4 fluid is best, correct?
If anyone has one that they are not using or don't need could they let us know?
Cheers Mark

 

[mountain thumper]

NO NO NO DOT 4(read the top of the clutch res0
100% mineral oil on the 07
this translates to going to a pharmacy and getting {LOLOLOL} laxative!!!! must be mineral oil only though, so no xlax
and this stuff is 10x slicker than snot, do your best not to get any on anything!

 

[wence]

NO NO NO DOT 4(read the top of the clutch res0
100% mineral oil on the 07
this translates to going to a pharmacy and getting {LOLOLOL} laxative!!!! must be mineral oil only though, so no xlax
and this stuff is 10x slicker than snot, do your best not to get any on anything!

Oh ok,
I had a quick read of some posts yesterday and was going to fix it temporarily and top it up. Lucky I couldn't fix it I guess.
Thanks Mountain thumper.
Cheers Mark

 

[Cruiser]

Not sure how the line on the 07 mounts to the mc but on my 03 I used a braided steel line from enduro eng. for a KTM exc 200ish.. just had to use a banjo bolt in the mc end which made it fit better with the handguards anyway..

 

[J D]

Hi Wence,

I think one of these would work ok http://www.pyramid-parts.com/brake-hoses-by-length/?osCsid=hsrqc8p0mqvoerp11bomeaagbpia0vqq

I've got one from them for the rear brake, only took about 3-4 days to turn up. The clutch line runs real close to the Bark Busters. I've been toying with the idea of changing to a banjo bolt set up to fix it once & for all.

 

[wence]

Hi Wence,

I think one of these would work ok http://www.pyramid-parts.com/brake-hoses-by-length/?osCsid=hsrqc8p0mqvoerp11bomeaagbpia0vqq

I've got one from them for the rear brake, only took about 3-4 days to turn up. The clutch line runs real close to the Bark Busters. I've been toying with the idea of changing to a banjo bolt set up to fix it once & for all.

Hey guys,
Thanks for all the help, I will follow it up and let you know.
Thanks again Mark.