Clutch Master

Wbdisco

Wbdisco

Member
Anyone ever put a 10.5mm clutch master on their bike? Supposedly it helps with a more precise pull. I know my stock AJP friction zone is pretty close to the grip. I know that shims and longer clutch rods don’t work to adjust throw, it can only be done on the fluid side. Magura makes a mineral oil 10.5mm I thought of trying. I realize clutch pull will increase but I was hoping that it would help with modulation.
 
On my old 2001, Les used a magura clutch master from a cannondale. It had a larger diameter piston. No clutch drag and could easily start in gear, etc. We used both the clutch master and the braided line from the cannondale.

I don't know the stock piston diameter on the clutch master cylinder. And I don't know the size of the cannondale master either - only that it was larger for more fluid displacement and greater throw on the clutch.

I really like the larger larger diameter piston on the magura - it was switched to mineral oil along the way...

This was years ago, so at the time cannondale parts were being sold off by a bankruptcy liquidator. And new oem cannondale parts were easily found on e-bay...

jeff
 
Check your basket isn't too heavily grooved.

I found if I ran Motul Transoil std it was hard to start in gear.
But Motul Transoil Expert. Perfect, never a problem since.
 
My basket is in good shape. I’m just trying to figure if they used a different clutch line for the Magura and AJPs. Both are mineral oil, just not sure on the thread for the magura matching up
 
You must log in or register to reply here.
Back
Top