cross over parts 09 ec300

[kevin]

i recently purchased a new ec300 and i was wondering if anybody knows of current cross over parts such as plastics, brakes,spockets,kicker,levers,for that matter any cross over parts available. thak you

 

['11EC300]

Try here: http://www.gasgasrider.org/html/parts_crossover.html

 

[hawaiidirtrider]

cr 250 honda clutch cross over?

I had heard that cr 250 honda plates work for clutches...but I haven't seen any links to cross reference so far. Anyone out there try or use them now.

 

[desertgasser300]

I had heard that cr 250 honda plates work for clutches...but I haven't seen any links to cross reference so far. Anyone out there try or use them now.

Someone on here manage to do it with the recluse plates and internals. Sounded like a lot of work to sort out?

 

[hawaiidirtrider]

Someone on here manage to do it with the recluse plates and internals. Sounded like a lot of work to sort out?

I heard that it was the regular clutch plates that fit regular gasgas clutch .. .. I just hadn't heard it from others. It was a gasgas honda guy that said so but I was just looking to see if others had done and known this.

 

[Fred1956]

Someone on here manage to do it with the recluse plates and internals. Sounded like a lot of work to sort out?

This explains it all, I have not done it yet but I have the clutches & spacer hanging on the peg...http://www.gasgasrider.org/forum/showthread.php?t=9383&highlight=clutch+washer

 

[Moto7man]

I had heard that cr 250 honda plates work for clutches...but I haven't seen any links to cross reference so far. Anyone out there try or use them now.

See post 27 on the thread below for CR Clutch Conversion and see post 28 for a CR Clutch Conversion for a Rekluse. Post 28 is mine(A link to a 2nd second thread is at the bottom of post 28). For a Rekluse you use a set of special rekluse steels(Rekluse has a special part number) and you use Honda CR Clutch fiber plates, simple. Originally, I had problems because rekluse sent me the steels with the wrong thickness. Once Rekluse sent me the correct steels it was a straight bolt up. I haven't had any problems. All the correct plates thicknesses are listed in the two threads

http://www.gasgasrider.org/forum/showthread.php?t=9383&page=3

 

[hawaiidirtrider]

See post 27 on the thread below for CR Clutch Conversion and see post 28 for a CR Clutch Conversion for a Rekluse. Post 28 is mine(A link to a 2nd second thread is at the bottom of post 28). For a Rekluse you use a set of special rekluse steels(Rekluse has a special part number) and you use Honda CR Clutch fiber plates, simple. Originally, I had problems because rekluse sent me the steels with the wrong thickness. Once Rekluse sent me the correct steels it was a straight bolt up. I haven't had any problems. All the correct plates thicknesses are listed in the two threads

http://www.gasgasrider.org/forum/showthread.php?t=9383&page=3

Thankyou very much!!!