Hi guys.. I have really bent and few time welded foot pegs on my 2008 gasser. I have pair of RMZ foot pegs with mounts. I want to cut old footpegs and use those from RMZ. Do you think is it possible to cut threads to frame or it would be better to weld it? I dont know if the frame on my gasser is hollow where footpegs are welded.
EC 250 2008 footpegs
- Thread starter mrfreezer
- Start date
Zman
Platinum Level Site Supporter
I agree there is not enough material and the threads will pull out and you will be very unhappy.
Anders
Gold Level Site Supporter
Thanks guys.. That's exactly what I was afraid of. Will weld it... I than I can use good looking billet pegs frok ebay for few bucks
You can use good looking billet pegs anyway. You just buy the Yamaha type. They will fit your frame (if the frame isn't damaged, that is).
Zman
Platinum Level Site Supporter
I found this link on Ebay which includes a WR footpeg mount with the kickstand bracket. You use the holes and edges for welding to the GG frame.
another option is to just get the two smaller YZ mounts that do not include the kickstand bracket.
https://www.ebay.com/itm/2008-Yamah...+peg+mount&_from=R40&rt=nc&_trksid=m570.l1313
Makes me wonder if this is a good option if you want to get away from the GG switchblade.
another option is to just get the two smaller YZ mounts that do not include the kickstand bracket.
https://www.ebay.com/itm/2008-Yamah...+peg+mount&_from=R40&rt=nc&_trksid=m570.l1313
Makes me wonder if this is a good option if you want to get away from the GG switchblade.
Anders
Gold Level Site Supporter
Nice work!
