hey guys ,
wanted to share with u my project and try to solve an issue i have with my suspension ,
this my gasgas 2014 32kw hp very nimble machine,
i think its like lighter then the gasgas 300f engine (didnt weight)
the rear suspenion feel great,
but the front feels to harsh,
i dont know if anyone changed the spring inside by the manual it should be 42nm, but the fork feels harsh,
i have changed the bushings and seals and oil 2.5 in chamber and ouuter chamber (290cc) preload 0 , pfp fully open , comp 24 clickls out rebound about 18 clicks out,
front sag with rider 45mm, (manual says 55-65mm for enduro),
my weight is around 80kg(battery weight 16kg ,motor 15kg including brackets, controller 5kg)
the fork feel harsh in low speed in enduro rdiding and abit above,
would love to get ur help im thinking to buy 4nm or 3.8 springs
ty alot
wanted to share with u my project and try to solve an issue i have with my suspension ,
this my gasgas 2014 32kw hp very nimble machine,
i think its like lighter then the gasgas 300f engine (didnt weight)
the rear suspenion feel great,
but the front feels to harsh,
i dont know if anyone changed the spring inside by the manual it should be 42nm, but the fork feels harsh,
i have changed the bushings and seals and oil 2.5 in chamber and ouuter chamber (290cc) preload 0 , pfp fully open , comp 24 clickls out rebound about 18 clicks out,
front sag with rider 45mm, (manual says 55-65mm for enduro),
my weight is around 80kg(battery weight 16kg ,motor 15kg including brackets, controller 5kg)
the fork feel harsh in low speed in enduro rdiding and abit above,
would love to get ur help im thinking to buy 4nm or 3.8 springs
ty alot