Exhaust to fit with Tranformation kit

[EC250]

Hi & Happy New Year

I wanted to get a new exhaust & silancer for my EC 250 1997 with Transformation kit fitted (2011) as it now has the 2011 subframe would
I need to order a (2011) Silencer and (1997)Exspasion pipe?
I was looking at DEP has any one done this?

Cheers for any advice

 

[Anders]

Hi & Happy New Year

I wanted to get a new exhaust & silancer for my EC 250 1997 with Transformation kit fitted (2011) as it now has the 2011 subframe would
I need to order a (2011) Silencer and (1997)Exspasion pipe?
I was looking at DEP has any one done this?

Cheers for any advice

I do not really know. On my '06 EC200, I used the same expansion chamber and silencer both before and after the transformation kit was installed. I have a FMF Gnarly and OEM silencer, both made to fit the '06.

As the expansion chamber is / should be tuned to the porting of your motor, it may or may not be a good idea to use a '11 chamber on a '97 motor.

If you don't need to replace the exhaust for other reasons, my suggestion is to try to mount what you have, and see how it can be made to fit.

 

[EC250]

Cheers for the reply, like you said about the expansion pipe I would need one for the year engine I have, unfortunately my exhaust has some big dents in it, I'm going to go for the 1997 expansion pipe and 2011 silencer.

 

[nknudsen]

Cheers for the reply, like you said about the expansion pipe I would need one for the year engine I have, unfortunately my exhaust has some big dents in it, I'm going to go for the 1997 expansion pipe and 2011 silencer.

On "my" bike I tried fitting a 2011 silencer with the oe 2000 Gnarly and it wouldn't fit with out modifying it. The angles were off for mounting. So in the end, I just modified my stock Turbine core silencer to fit. BTW, I was going for a perfect fit with space for a 140 rear tire.

 

[fullthrottle]

Cheers for the reply, like you said about the expansion pipe I would need one for the year engine I have, unfortunately my exhaust has some big dents in it, I'm going to go for the 1997 expansion pipe and 2011 silencer.

I think you will either need both early pipe and muffler then make mount for front muffler mount or late model pipe and muffler as the pipe size is different i think

 

[EC250]

Cheers for all the advice, I think the easiest thing to do is fit a new 1997 exhaust and Silencer and modify the Silencer mounts, sounds like the easiest way, I was planning on getting a new 97 exhaust and 2011 Silencer but that sounds like it's going to be Hassle.

 

[Zman]

I was able to fix some of the pipe to silencer alignment issues by heating the silencer inlet pipe and changing the angle so the mounts line up. I also had to trim the length of the expansion chamber head pipe where it connects with the silencer. This worked for putting a 2007 pipe on older bikes.