For Sale: Scotts damper, skid plate, pipe guard, tank, ect. from 2008 250EC

[five21racing]

These parts were taken off my 2008 250EC.

Clarke 3.2 (or 3.0) gallon fuel tank - $115 SOLD
* 5 out of 10 - 1 gouge at the bottom (see picture), no petcock

Guts Racing seat cover, Guts Racing tall seat foam, OEM GG seat pan - $115 SOLD
- needs the seat bolt/washer
* 9.5 out of 10 - 1 ride old

Eline pipe guard - $90 SOLD
* 8 out of 10 - no gouges or dings

Hyde Racing plastic skid plate - $60 SOLD
- can be installed without removing the pipe, installation helper bolt included
* 7 out of 10 - 1 “burn” mark from the pipe touching

Renthal fat bars - MC bend & Renthal Kevlar grips- $80
* new

Scotts Performance steering damper - $250 SOLD
- includes 1 n 1/8” & 7/8” top bar mounts as well as everything else
- used 25 hours or less
- **tower isn't included** - price adjusted
* 8.5 out of 10

Fastway F3 foot pegs - $75SOLD
* 6.5 out of 10 - the edges have been ground down a little bit

WP larger fuel filter - $2
* new

LTR Racing jet kit - $25 - “PWK-0”
* new

Cycra hand guards - $50 SOLD
* 7 out of 10 - 1 n 1/8” clamps

(2) Turner valve stem caps + rim lock towers - $6 each (2 kits total) 1 kit is SOLD
*9 out of 10, some pieces are new


Price + shipping/PayPal fees (I'll take a money order if you don't want to pay the PP fees)

Email: five21racing @ hotmail.com (I check my email much more often than the site)

My Ebay user ID: five21racing if you would like to check my feedback on there

I'll try to make someone a better deal if they buy more than one part. I looked up the prices of new parts and went from there.

***The stock 250 is for sale now***

 

[widebear]

I'll take the cycra's and fuel filter. If you can get me a USPS shipping quote to B.C. V2C-3H8. Pm me with your paypal info and I'll fire you off some cash.

 

[five21racing]

I'll take the cycra's and fuel filter. If you can get me a USPS shipping quote to B.C. V2C-3H8. Pm me with your paypal info and I'll fire you off some cash.

PM sent, I'll throw the fuel filter in with the hand guards for free.

 

[lordfeyr]

Any idea if that scotts setup will fit an 04 ec 300? And I take it the frame tower is weld on so I would have to have that welded back onto the bike?

 

[five21racing]

Any idea if that scotts setup will fit an 04 ec 300? And I take it the frame tower is weld on so I would have to have that welded back onto the bike?

I'm not really sure. Compared to other brands, the GG's have changed over the past years less. Since you have to weld the mount on, you can move it wherever you want (forward or backward).

Edit: I just looked on the Scott's website and they don't even show anything for the 2008 bikes. My guess is the kit I purchased is just a univeral kit for any of the late model GasGas bikes.

 

[PEB]

If widebear didnt buy them I 'll take the handguards.

 

[widebear]

Peb. Go ahead and take em. Merry Christmas.

 

[PEB]

Speaking of Merry Christmas did you ever mount up that pipe I sold you? When I put the new one one I realized trhe old one wasn't that bent.

 

[widebear]

Yes Paul. I got it to fit with some creative technology, main thing it was nice and shiney for that bike resale value thing.

 

[five21racing]

If widebear didnt buy them I 'll take the handguards.

shoot me an email and we'll go from there.

 

[five21racing]

ttt, offers?
Not saying I'll accept but, emails are cheap to send.

 

[lineman12345678]

If you will take $50 for the pipe guard I will buy it.

 

[lineman12345678]

I am also interedted in the TM designs chain guide. I would e willing to mail you my stock one to throw on the bike for sale.

 

[five21racing]

I'm going to pass on the offer. The TM guide needs to stay on the bike incase I start riding in the Spring. The stock unit isn't a very good design.

 

[flybars]

The Cycra's don't show as sold. If PEB doesn't have them I'd like them. Also, I need a pipe guard for a '03 ec250 Fatty. If yours will work, I'd be interested. Thanks.

 

[five21racing]

The Cycra's don't show as sold. If PEB doesn't have them I'd like them. Also, I need a pipe guard for a '03 ec250 Fatty. If yours will work, I'd be interested. Thanks.

He didn't buy the hand guards.

I'll check to see if there's a part number, which there should be, on the pipe guard. It was kind of a 'universal' guard that flexed into place. Worked well for the amount of time I had it on the pipe.

FMF Fatty is the exhaust on the 250 also.

 

[flybars]

Cool. PM me when U find out. So the Cycra's for sure and maybe the pipe guard too. Thanks, Bob.

 

[five21racing]

Cool. PM me when U find out. So the Cycra's for sure and maybe the pipe guard too. Thanks, Bob.

I found this wrote on the inside of the guard: SPG562 (I'm not sure if the numbers are correct though, hard too read)

If you want to take a chance on the pipe guard fitting, I'll take $25 off for that and hand guards.

 

[flybars]

I'll just take the Cycra's. Expect an email. Thanks.

 

[gasgas332]

Scotts Performance steering damper

Is the Scotts Performance steering damper still available? If so would you take $225?