Gas gas 250 2011 speedo problem

[dimtsam]

Hello
I just got a GAS GAS 250 2T EC 2011. The bike is good. But I want to fix the speedo. I put new battery and its on when I start the bike. It starts count the operation time. But when I run off the bike, the operation time goes to zero again. Can you tell me why?
And an other problem... The speedo has only one cable connected, the power one. The other 3, the temp and speed sensors are cutted. Can you tell me exactly where are they connected?

 

[john r b]

Try the Trail tech web site = trailtech.net

 

[dimtsam]

Didnt find any help at trailtech.net

 

[Thomas R]

Had a trailtech once, the speedsensor is a hall sensor you på on the fork and a magnet etc on the brakedisc, the watertemp sensor i provided i a small tube, you cut a radiator hose and put it in between, but i found out that the stock temp sensor works just as well. This wass on my road bike and it han to have an constant 12v and a ignition 12v otherwise it would reset everytime after riding, dont know if this helps

 

[Jakobi]

http://www.trailtech.net/instructions

The 2011+ came with a Vector in countries that received it OEM. 2010 and earlier used a Vapor.