HELP: 2018 GGEC300 Removing starter area conical gear and bearings

emepher

New member
Recently found my bearing seized and the conical gears are not spinning. I sprayed penetrant and unseized the bearing but want to replace it. In what order are they removed and how?
 

Attachments

  • conical gear 2.JPG
    conical gear 2.JPG
    19.7 KB · Views: 61
  • conical gear.jpg
    conical gear.jpg
    64.5 KB · Views: 66
I used heat on the starter casting and a few firm taps on the edge of the workbench.
Came out nicely.
 
yep, heat around the outside of the case where the bearing lives.

I also made a tool to fit behind the pinion section of the shaft that fitted onto a slide hammer. This helped.
 
Hello, I used this "tool". Nut and screw. I removed also the gear that is fixed with the axis but i don?t know how to explain in english, sorry.
 

Attachments

  • sacar rodamiento.jpg
    sacar rodamiento.jpg
    103.2 KB · Views: 71
Back
Top