Hi I was wondering what type of forks the 99 ec200 came out with.I would assume they are mazocchi but are there markings on the fork itself to identify them?I want to replace the oil in them,anybody know where to find a manual for conventional-non upsidedown-type forks?Or maybe someone who knows how to replace oil can give a quick rundown of the process?
manual for 99ec200 front forks?
- Thread starter bitoman
- Start date
Skidad
New member
Here is on source of info. Check anything that say "Magnum". You most likely have the 45mm
http://www.marzocchi.co.uk/techinfo.html
Here is a manual you can order for cheap ($7.00 + shipping). Not sure if you are in the US or not (please add to your sig).
http://www.repairmanual.com/motorcycles/1997/36/0/7940/13841
http://www.marzocchi.co.uk/techinfo.html
Here is a manual you can order for cheap ($7.00 + shipping). Not sure if you are in the US or not (please add to your sig).
http://www.repairmanual.com/motorcycles/1997/36/0/7940/13841
slocalspode
Member
Does this same MOD apply to the 50mm conventional forks as well?
Jeff
Jeff
slocalspode
Member
SkiDad, thanks for the info on the 50mm Zokes.
As far as fitting a new set for forks to the 99, 200.
My guess is that the brakes will not fit. If they are
Brembos on the front like my 98. My 02 EC300 has
WP upside-downs and Nissin calipers on the front.
Not interchangeable. I'd say you'd need pretty much
everything from the steering stem forward. And most
likely a new wheel, or at least spacers.
Just my opinion though.
Jeff So. Cal.
As far as fitting a new set for forks to the 99, 200.
My guess is that the brakes will not fit. If they are
Brembos on the front like my 98. My 02 EC300 has
WP upside-downs and Nissin calipers on the front.
Not interchangeable. I'd say you'd need pretty much
everything from the steering stem forward. And most
likely a new wheel, or at least spacers.
Just my opinion though.
Jeff So. Cal.
