need quick wheel help

[gump147]

Hi I have an 06 ec 200 will wheels off of a 2010 300 work on my bike thanks

 

[gasser]

2010 gasser wheels are a direct swap with the 07 bikes I believe. Prior to 2007 the hubs were the same but some spacers and some bearings were different. My 01 bike for instance had a smaller diameter axle up front so the wheel bearings were different than my 07 gasser. Also prior to 2007 GG made a change to the rear wheel - they changed the drive side wheel spacer to fit inside the bearing where before it just pressed against the outside of the bearing.

 

[Elvis74]

The wheels fit from 1999 to 2015, you just need to have the right bearings and spacer!



Gesendet von iPad mit Tapatalk

 

[Moto7man]

GG wheels on a 94 CR250

I know this is a little off topic, wIll a set of 2011 GG wheels with the correct spacers fit a 94 Honda CR 250 two stroke? Does anybody know? I just bought the Honda but It won't be delivered for a bit.

 

[(F5)]

Only the odd years will fit up to 2019, but the even ones won't sorry. Except during lunar eclipses & in 3rd gear.

 

[gump147]

wheels

Only the odd years will fit up to 2019, but the even ones won't sorry. Except during lunar eclipses & in 3rd gear.

So is it true that the axle changed from 03 to 04 since they are even and odd numbers lol appreciate the joke but could use a real answer if you no I'm about to spend 450 on a set and don't want to waste my money I've got several different answers from different forums 03 to 04 different and 07 to 10 on the rear axle and so on and so fourth if you can help thanks

 

[gasser]

So is it true that the axle changed from 03 to 04 since they are even and odd numbers lol appreciate the joke but could use a real answer if you no I'm about to spend 450 on a set and don't want to waste my money I've got several different answers from different forums 03 to 04 different and 07 to 10 on the rear axle and so on and so fourth if you can help thanks

All hubs at least back to 1999 are the same if they aren't polished (some special edition models came with polished Hann hobs). According to the factory parts manuals, bearing sets are the same for 2005 through 2014 (both front and back). I also checked the GasGas racing parts catalog and it confirmed this information.
http://www.gasgasmotos.es/en/racing-parts1/53-bearing-and-seal-kit-for-rear-wheel.html
http://www.gasgasmotos.es/en/racing-parts1/50-bearing-and-seal-kit-for-front-wheel.html