New aftermarket gasgas product ideas. Things you would like to see?

While we had the auto lathe spinning up quick release seat kit washers this week we also did some 10mm bar raisers. They are the maximum you can use with the stock bolts.

Should I anodize them red????


We also did some 22mm front axle nuts that fit the 07 bikes onwards with a 22mm thread......BUT we also did another limited run on the early 20mm thread of the 04-06 axle and the early ohlins. Check out our website for them soon.

Should I anodize them too??
 
How about a kit to drill a few holes in the OE kickstand foot..and fasten a larger base....that doesnt sink in :rolleyes:

I hate having to stop on the trail to have a leak.....only to have to run to the bike to keep it from falling over :p

and some good quality wheel spacers...with an internal O ring..to keep the shluck out of the bearings....
 
rear support

a rear fender support would be nice! g-g used to sell them for about 90 bucks! its not strong and if you tweek it back it breaks! without a fender support the license plate gets sucked into the tire on big breaking bumps!
 
Acerbis used to sell a generic nylon rear fender brace that was excellent, its still on my '00 XC250 my buddy has. The GG alloy loop sucks as its a big lever that contributes to bending the subframe.
 
randy said:
a rear fender support would be nice! g-g used to sell them for about 90 bucks! its not strong and if you tweek it back it breaks! without a fender support the license plate gets sucked into the tire on big breaking bumps!
Click to expand...

90 BUCKS?????:eek:

the original standard rear fender support including the licens plate holder cost in europe less than 20,- euros
What are they doing in the US? does the do a gold plating on that thing?
 
He is talking about the aluminum subframe extension loop on the older bikes. Your right though its not worth $90 to more eaisly bend your subframe.

It would be easy enough to make your own fender support from a piece of nylon or poly stock from an industrial supplier.
 
Looks exactly like what I had on my '00 and it was great. Not sure if it would be good enough to hang a big tailight/plate holder on the fender but a small enduro plate holder and LED light no problem.
 
We are a fairly new GG dealer and I agree there is not as much aftermarket support right now as some other brands but, many of the parts mentioned are already available. E-line has carbon fiber pipe guards ($139.99) Enduro Engineering has several products available and more on the way, such as Handlebar risers, disc guards, axle pulls, seat foam, etc..The new parts catalog from Go Fasters is great. Your local dealers should already have the catalog and be stocking more products. These bikes have come a long way in a very short time. Expect alot more aftermarket support in the very near future.
Oh yea, someone make some tie down straps with soft hooks that say Gas Gas they may exist but I havent found them!!!
 
I would like to see a steel sidestand bilt like the older bikes have because the aluminum stand bends too easily.
 
You must log in or register to reply here.

Similar threads

M
2002 EC300 no spark - new CDI box ?
Replies
3
Views
1K
(F5)
(F5)
J
Crankshaft Bearings - Old Style Vs New Style
Replies
6
Views
3K
Neil E.
N
B
Debating on purchasing my first gasgas
Replies
13
Views
7K
Ghostrider
G
bluespark
New/Different Clake products and possible lifetime 20% discount
Replies
0
Views
5K
bluespark
bluespark
J
New to gasgas, trouble with getting grip
Replies
12
Views
6K
Jimmy
J
Back
Top