Parting out ec200

[gasser]

Complete bike 99 model, 4 rides since new piston and rings, motor starts easily (always has) and runs good, oversize tank. Let me know what you're interested in.
931-303-5259
2wheelsken@gmail.com

 

[tomatoe333]

Complete bike 99 model, 4 rides since new piston and rings, motor starts easily (always has) and runs good, oversize tank. Let me know what you're interested in.
931-303-5259
2wheelsken@gmail.com

What kind of shape are the rear fender and radiator shrouds in? I could use some replacements...

And how long are the forks and shock? (see my other thread )

 

[SpeedyManiac]

Will the tank fit my 01? How much for the tank? Where are you located? Also, what kind of shape is the seat and seat cover in? How much?

 

[gasser]

Shrouds have no cracks but still have the original graphics which are getting fairly ragged. New graphics are $25 online.
Rear finder has 6 inch crack from rear tip inward repaired with small yellow zip ties (very serviceable).
I have an 01xc300 I'll see if the tank will fit it.
The seat is original, has no rips, but most corners are worn through. It would still look good if the yellow and white stripes on the sides were not discolored.

 

[gasser]

Almost forgot, this bike is in Cookeville, TN (zip 38506)







0

 

[add]

Ohlins forks?

 

[gasser]

Forks are Zook Magnum 45 (conventional)

 

[ricegas]

How much for the wheels?

 

[gasser250sm]

ide be intrested in the CDI PM me with a price!!

 

[gasser]

Update

Update:
:Forks and triple clamps are sold.
:Fenders are no longer available.
:Large ec ignition and flywheel $130
:Complete engine $400
:Engine w/o ignition & flywheel $300
:IMS oversize tank $110 obo (will fit 01-04 bikes but
would require older shrouds and maybe seat).

 

[gasser]

More Prices

Very good Front wheel $175 -Excell rim (no dents) - tight
spokes (no rust) - like new bearings.
Front Rotor $70 (excellent shape)

 

[Rick]

Did you use the 99 shrouds & seat with the o/s tank?

Thanks

 

[gasser]

Yes the O/S tank, original shrouds, and seat are still on the 99ec200.

 

[redman13]

How much for the foot pegs?

 

[gasser]

I gave away the pegs on the 99 bike but I have an almost new set that I took off my 07ec250 to install a set of pivot pegs. $30 plus shipping.

 

[FULLBURNER]

Parts

Would you have a side stand and bracket and be willing to post to Australia?

 

[gasser250sm]

im still in need of the CDI, how much you want for it ? thanks

 

[gasser]

$125 plus shipping.

 

[Hapnin]

Interested in the clutch Master and slave cylinders.
What's your price?

Thanks.

 

[bondo]

PM'ed you.