Pfp adjuster

[Cox76y]

I'm just doing a bit of maintenance on my zokes and noticed that when I turn the pfp there is no click. Does anyone know how to fix this? Is it going to be a problem? I know I can count the turns.
Thanks
Jc

 

[Anders]

I'm just doing a bit of maintenance on my zokes and noticed that when I turn the pfp there is no click. Does anyone know how to fix this? Is it going to be a problem? I know I can count the turns.
Thanks
Jc

There is no fix, as there is no problem. The pfp adjustment does not click in the fist place (at least does not my 15 model do so)

 

[Jakobi]

There is no fix, as there is no problem. The pfp adjustment does not click in the fist place (at least does not my 15 model do so)

Correct! PFP simply runs up/down a fine thread and is limited in travel by a couple snap rings/circlips.

The actual clickers can be a bit faint if packed up with excessive grease. No issues there either though.

 

[Cox76y]

Ok,
That's good news. Whilst on the subject I'm changing my fork oil n want to put a little more in than I had last time. It's great 90% of the time but on some big erosion mounds bottoms out. Thinking I'll try a bit more preload and fork oil before I fork out the extra cash for new Springs. How much oil are people putting in the 48mm zokes?
Thanks jc

 

[Cox76y]

Reposted

 

[gasgasman]

5w, 325cc each leg.