Radiator guards and/or radiator parts crossover

Does anyone know what radiator guards will fit a 2007 450FSR? Or radiators? Are they the same as the 2 stroke rads? There doesn't seem to be any that list for the 450. Owned the bike since new and I've found alot of parts that fit, but don't list for this machine. I fabbed up a set of steel guards many years ago but I have just bought new plastics (2010 restyle) and the fender doesn't clear. I figure if the 2 stroke ones will fit, I'll just buy a set instead of fabbing a new set
 
On the subject of restyle kit ? So some sellers sell the front fender as 2010 and 2011. There is a difference . The 2011 fender only used two bolts thru the bottom up into triple clamp . Other two bolts go into a plastic add in piece that bolts to front of triple clamp . I have a 2011 and 2010 . If you have 2011 fender without the bracket this might be why it hits . I have a nos set of grey shrouds with factory Decals for an older 4 stroke Gasgas . I bought hoping to use on my 2t bikes but the radiators are different from the 4t-2t. The lower mount don’t line up to radiator
 
I got a good deal on the whole kit for 2010. Didn't know the fender was different until I went to apply the stickers. It has 4 bolts and I also have a fender brace that bolts to the front of the triple. It clears the rads fine, it was just my homemade guards that hit. Running without for now. My rads got crushed long ago but never leaked so I fabbed up the brackets. Anyway, I guess 2 stroke rads or cages are out. Thanks
 
I bought a set of the Chinese all welded radiators before off eBay for the 2 strokes . The wides they welded on were off a good bit and the front radiator vents would not function without being jammed up against coils . So it would run a hole into them . So they hit or miss I guess.
 
Back
Top