top nut on steering stem

[knobbyboy]

What does it cross over with? Another brand- ktm? honda? Putting together a basket case and that nut is missing, need to order one but don't know what it is. The top most nut on the steering stem, the one right under the handle bars, center. got an 05, 06, and 11, appears to be the same nut on each bike. thanks!

 

[Jakobi]

Check the parts fiche. Might have the thread listed with the description, otherwise measure up the threads.

 

[knobbyboy]

anybody else? anyone ever lost one of these and had to replace?

also, do any of the aftermarket billet gas caps fit the GG?

thanks

 

[Leo]

Or you can try one KM nut (it can be found in bearings store)

 

[knobbyboy]

ended up just ordering an oem nut

going to try to repair the gas cap or buy oem, doesn't appear anything else will fit that tank

 

[kpuc11]

can you tell me what size wrench fits the top steering stem nut????? Thanks in advance.

 

[bowhunter007]

can you tell me what size wrench fits the top steering stem nut????? Thanks in advance.

something very close to 32mm, if that's not the right number.

 

[Kyle01]

I've gotten a nylock spanner- type nut for a DR 650 from McMaster-Carr. You just gotta know the thread pitch/diameter. If I remember correctly- it's a "super fine" thread.

 

[kpuc11]

32 is a tad to big, I don't have a 31 I guess I need go buy one and try.

 

[Fred1956]

32 is a tad to big, I don't have a 31 I guess I need go buy one and try.

My steering stem nut is 30mm