torque

[Rabbitist]

hey guys anyone know the torque needed for an impeller/ clutch basket/clutch springs on my 2000 ec 250?

 

[Rabbitist]

oh and my txt 1999 250 rear axel torque?

 

[pscook]

Clutch boss- 40 NM
Springs- 10 NM
Impeller- 6 NM
Manual has no specific for the axle, but there is a general note that says "Nut, 22mm 130 NM 94 ft.lb" in the front of the manual for a 2006 EC.

 

[Rabbitist]

Thanks very much! That seems pretty high for an aluminium axle and nuts on a trials bike.. I read some were earlier it was between 40 - 50?? Seem about right??

 

[(F5)]

crazy.

On my TXT I just use a foot long spanner until it feels about right. Only 12hp trying to pull it out of line.

 

[pscook]

Thanks very much! That seems pretty high for an aluminium axle and nuts on a trials bike.. I read some were earlier it was between 40 - 50?? Seem about right??

Didn't know that the axle was ally, sorry. That is why I made sure to say that it was for a 2006 EC model. I'm not familiar with trials bikes, which has been shown in the last two sentences. But now I know twice as much as I ever did about them. I'll stop typing now.