What is an EC200's Standard gearing

[warnzie]

Hi everyone, sorry for all my mundaine posts...very very new to a gasser...especially coming of a YZ125WR Could someone tell me what the standard gearing for a 04 EC200 is. I got told it should be 13/48 as mine had a front 12, so i purchased a 13T front sprocket and it fits but the right-hand edge/side of the sproket hits the chain guide on the swing arm...is this normal? I mean i can turn the sproket around..not by hand but by pushing the bike but im not convinced it should be like this..Any help or advice would be greatly apreciated.

Nathan

 

[GMP]

If your talking about the inner side of the countershaft sprocket just touching the swingarm chain slider thats normal. You can loosen the slider bolt that goes through the swingarm and shift the slider slightly. I think 13/48 is way too high unless you do a lot of road riding. The 13T is better than a 12 for wear but Id go with 13/52.