Will a YZ250 front pipe crossover to a GG EC250 ?

gasser250sm

New member
Hi,

I have found a used DOMA pipe from a YZ250 it says it will fit a 02-09 YZ im just woundering would it maybee fit my 01 GG 250, as i have seen before FMF gnarly's from GG's been fitted onto YZ's!

Thanks

Dhyllan
 
I have to say that I haven't updated the crossover parts list in a long, long time because "fitting" is "in the eye of the beholder..."

jeff
 
I guess i should have said that it was not a direct bolt on!!, but if you have a welder all you would have to do is change the front pipe inlet, and the mounts, and then it would fit.
I thought about doing it with one of these because the stock yz pipes are much stronger than the GG pipes and will take more abuse, i have installed a yz silencer on my GG before, without too much hassle.
 
Thats not exactly what I would call a crossover part! FWIW, the OEM GG pipes are very stout, like an FMF Gnarly.

On the 125 GG, A YZ 125 pipe will bolt up.
 
Thanks guys i will definatley try as it is cheap ! and report back, i have also found a doma pipe off a 2002 CR250, i know a few parts crossover with the CR what about the front pipe? anyone any expierence? Also if use pipes off other bikes on my GG will perform just as well if i got a pipe made for the GG perofrmance wise will there be a difference as i dont know if doma would change the characteristics of each pipe for specific bikes? thanks
 
I thought I saw where an 01 RM 250 pipe was the same as a gasser, and I must say they look the same to me. Don't know about the mounting bolts though, but the pipes look identical.
 
Thats not exactly what I would call a crossover part! FWIW, the OEM GG pipes are very stout, like an FMF Gnarly.

On the 125 GG, A YZ 125 pipe will bolt up.

I know it's pretty old but I would like to
Come back to this!
Which year of the yz pipes will fit the 125 2011gasser?
 
Back
Top