WTB: ECU/CDI for FSR/FSE

[Mikesbaron]

Utah here.

Need a new CDI/ECU for a 2007-2008 FSR or FSE 450.

 

[Gasser Nate]

Why do you think you need one? There was not one that I sold to around ten different people that was the actual problem when I was a dealer. It was more often than not a wiring issue at the ecu plug.

 

[Mikesbaron]

Ok thanks for the insight. The clip that holds the ECU to the wiring harness is broke so i zip-tied it together. I'm not sure how to tell if there is a bad connection there still.

 

[Gasser Nate]

You can buy the socket separately. It is the same as some Ducatis. The wiring usually breaks just after the plug. It is very hard to find though.

 

[Mikesbaron]

This is the plug I'm talking about with the broken clip. Plugs directly into the ECU. Is this the same one you are referring to? If so where should I be looking exactly for bad connection?

 

[Gasser Nate]

Every one I have found has either been a loose/corroded terminal in that plug or a break in the harness around 100mm from the plug.

I have fixed about 5 like that already.

 

[Mikesbaron]

Sounds good I'll check it out.

 

[Gasser Nate]

Continuity checks on each wire while wiggling the harness is your best bet.

 

[fastisbetter]

I'm also looking for an ECM. 2007 450 fsr/fse. Confirmed burned chips upon opening it. Battery was badly swollen. Suspect bad regulator cooked it. If anyone has one and can ship to Nova Scotia Canada, please let me know

 

[Hellcat]

A friend of mine bought a subframe few years ago and it was off a 4 stroke . He still has the ignition box. But we have no way of testing it . Would need info off yours to match

 

[fastisbetter]

Mine is labeled
IAW15P.L1
61601.129.00
GAS_GAS FSE450-03

 

[Hellcat]

I sent info to friend to compare