2003 EC200 Timing

[wade_wade]

Hi everyone, I was wondering about the position of the flywheel trigger position to the pickup, the crank is TDC , is this the normal position for the flywheel trigger to pickup at TDC
The bike ran well with this setting
thanks

 

[(F5)]

Well from memory if you remove the flywheel there is adjustment on the stator but it is fitted with a steel shimmer to set it as factory wanted. On my 200 (2002) I played around a little both ways on the dyno with a road tyre fitted for the runs, and found no advantage over stock.

 

[wade_wade]

Sure,Did your pickup have a similar location to the picture?

 

[(F5)]

Im going to say yes but 20 years ago now.