Am I nuts? 1999 EC 250

Really pretty happy. Communication was not good. But the end result was fantastic. Basically i chose a design and he made that work for 3 different templates for 1 bike. KX rear fender and side plates. Ktm sx front fender and number plate. GG shrouds.











 
I rode this again yesterday. I love this bike. I seriously bought the perfect bike for me.

Just working on little things. Needs radiator guards and a couple little minor items. Also lost a fork seal. Good thing I have a set of SKF's in the shop!
 
Left side (compression leg) on my WP Extreme forks blew the fork seal. I'll replace it and change the all the fluid while I have then off. Also my buddy got me some recovery straps for my birthday. I'll post pictures. Also radiator guards to come.
 
They look good. How do you feel about them? Weight, price, mounting points??? Anything else?

I could use a set on my '01 XC 200, so I'm curious.

RB
 
RBrider said:
They look good. How do you feel about them? Weight, price, mounting points??? Anything else?



I could use a set on my '01 XC 200, so I'm curious.



RB
Click to expand...



They came with all the hardware. They seem pretty beefy. For me its a necessity so I'll take the weight penalty. But they are no more heavy than any others. All the holes lined up like they should. Although I did have to pull pretty hard on the right side one to get the shroud bolts to line up on the tank.

Overall I would recommend them.
 
I have a set on both my bikes they have been to hell and back. They are very easy to Straighten back into shape when needed.

Where did you find those last I herd Flatland was no longer making them for the GG
 
So finally got a chance to weigh the bike on our scale. Pretty pleased I was expecting worse.

263 full of fuel ready to ride. As outfitted. 5 lbs heavier than a 2005 kx250!
 
Last edited:
Thanks for posting that weight. Seems heavy, but my XC 200 feels like a feather compared to my EXC 450, so the 450 must really be a tank.

RB
 
You must log in or register to reply here.

Similar threads

D
Gasgas ec300 2006 crank shaft seal help
Replies
7
Views
2K
(F5)
(F5)
B
Gas Gas Ec250 Cylinder Head 1mm Machined Increased Compression Lower Squish 2003
Replies
0
Views
2K
bartrumboi
B
Anders
Clutch differences 2015 vs 2018 and onwards
Replies
5
Views
2K
Anders
Anders
M
Rieju Ranger 300
Replies
10
Views
30K
Moto7man
M
V
Crank seal leak - installation question
Replies
8
Views
13K
(F5)
(F5)
Back
Top