bearings bearings and more bearings...

[stainlesscycle]

i figured i'd offer these up here before they went to the great fleamarket in the sky. i have an over abundance, and i've pulled what i needed.

these are all quality. no junk. i opened a few to check country of origin...

if you're not familiar with bearing coding:
2Z or ZZ is shielded
2RS is sealed
C3 is tolerance - most are c3, if not marked i assume c1
NR (snap ring - for alignment - used on lots of older euro mx (husky in particular)


PRICES QUOTED IF YOU PM ME. these will be LESS EXPENSIVE THAN ANYWHERE ELSE. that means cheap. at most 50-75% of retail.. mostly $3-$10 each.. these are not junk chinese bearings (well there are 2 chinese ones hiding in there). they are all recognizable high quality bearings. these are very common sizes for motor and wheels.....

if anyone wants to make an offer on all of them, feel free! pretty handy having a good stock of bearings....

shipping: USA
1-8 bearings $5.00
9-50 bearings $10.00

shipping international
1-8 bearings $14.00
9-16 bearings $28.00
etc..


FAG
(1)6202 2Z(zz) C3
(7)6204 2RS C3
(2)6204 2Z(zz) C3


SKF (USA/ARGENTINA)
(2)6305 C3
(1)6308 C3 - marked MRC - usa made, must be in wrong box...
(6)6204NR (snap ring)
(2)6205ZZ
(1)6206ZZ
(2)6209RS C3
(3)6208RS C3
(4)62042RS C3

SNR (FRANCE)
(4) 6204RS C3
(1) 6204 C3
(2) 60062RS
(1) 6205ZZ

NSK
(2)62032RS C3

NTN (japan)
60052RS NR (snap ring) C3
(2) 6204ZZ (Tawian)
(3)62042RS C3

MRC
CONV4SZZ2 (nice 7488-8) (ODDBALL!)

HIC (JAPAN)
(3) 83406 C3

new departure (USA)
(2) 3202 (VINTAGE!)

 

[Swervin]

bearings

I would like to have a complete set of bearings for my 2000 model EC300 because it's old,not sure I will have time to look up all the data to form a list? I don't need them at the current time but would indeed be nice to have!
Got any wisdom on the issue? Possibly familiar with what bearings would comprise a set? Let me know
Thanks

 

[swazi_matt]

Anything there I can use on my 2010 sachs?